Seeing is believing w/ the Optrel Crystal 2.0 (Black) welding helmet. A light transmission of 31% in bright condition (protection level 2) gives you a practically unclouded, clear view of the working environment. It’s similar to looking out a window. You’ll have a nearly perfect color spectrum so you can see what is going on in the weld pool, before, during, and after welding. Talk about enlightenment!
| Shade levels | Inactive: Shade level 2.0 Active, Manual: Shade level 4-12 |
| Autopilot | Automatic protection level regulation across a range from 4-12 with individual calibration option of ± 2 |
| Power supply | Solar cells, 2 lithium batteries (CR2032) |
| Sensors | Three sensors |
| Sensitivity | Infinitely adjustable, now with “Super High” sensitivity |
| Switching time | Bright to dark: 0.100 ms at room temperature, 0.070 ms at 55°C Dark to bright: 0.1 s to 2.0 s (with dimming function) |
| Classification EN379 | Optical Class: 1 Stray Light Class: 1 Homogeneity Class: 1 Angle Dependency Class: 2 |
| Shape Stability | Welding mask: up to 220 °C / 428 °F Front cover lens: up to 137 °C / 279 °F |
| Eye Protection | Ultraviolet / Infrared Protection: Maximum protection in the entire protection level range |
| Operating Temperature | -10°C to +70°C / 14°F to 158°F |
| Storage Temperature | -20°C to +80°C / -4°F to 176°F |
| Total Weight | 460g / 18.7oz |
| Scope of Delivery | Welding helmet, manual |
| Warranty | 2 years with additional 1 year warranty extension (excluding battery) if the product is registered within the first 6 months: click here to register |
Have a question?
What is the size of the lens viewing area?
The viewing area is 50mm X 100mm. This equates to 10% larger than a standard 2″ X 4″ lens. If viewing area size is your most important feature you should check out our panoramaxx series of hoods.
Thanks. 50mm (1.9685″) x 100mm (3.93701). It’s actually smaller, but maybe the standard 2″ x 4″ don’t really have the full 2″ x 4″ viewing. I just got my Crystal 2.0 (first welding helmet ever) and need to dial in the adjustments… not sure if I’m going to opt for the halo accessory or the isofit headgear. The basic head gear the came with it wasn’t that comfortable… but I only adjusted the top of the head band… need to dial in the others and likely just need to get it “worn” in.
The 50mm x 100mm is the actual size of the viewing area. A 2″ x 4″ lens usually has a 1.25″ x 3.5″ viewing area but is measured by the outer dimensions, with frame and most likely solar cells that measurement is 2″ x 4″.
Thanks for the clarification. I probably don’t fully appreciate how clear the Crystal 2.0 is…. this is the only welding helmet I’ve every worn.
Having a Crystal 2.0 as your first hood is like having a Ferrrari as your first car…congratulations!
Is it possible to buy just a new black shell for crystal 2.0?
Yes, you can buy just a black replacement shell for the 2.0. The part number is 5001.691 but is not listed on our website. Any of our distributors in our where to buy can order this item for you.
Does this welding helmet have an IP76 rating?
We are not familiar with IP76. The IP rating system uses 2 digits. The first digit should be no greater than 6 and the second digit should be 9 or less. We currently do not do any IP testing and if you are referring to IP67 the hood is not waterproof but could be used outdoors in light rain and you should be fine.
I need a +3.0 magnifying lens, is that available?
We only offer magnification in +1.0, +1.5, +2.0 and +2.5.
What are the dimensions of the Crystal 2.0 hood (the shell), specifically the width? What hood of yours offers the best coverage? Thanks
The shell of the crystal 2.0 measures 7.75 inches behind the head and 9.25 inches down below the jaw line. If you need additional protection we offer leather chest and head/neck protectors.
Stephen Konzen –
Along with the panorama quattro, i also use this hood ( crystal 2.0) and i have to say just when i thought optrel mastered the perfect lense i welded with this one !!!! INCREDIBLE!!!!! Its like looking out your picture window !!! Mind blown! Watch out speedglass, miller , jackson, lincoln and nexgen, cause you dont stand a chance!
Scott Krause –
Incredible view and clarity and very light weight. Even better with the IsoFit headgear. Basic head gear was ok, but for me, the IsoFit head gear made a huge difference in comfort! I can feel it securely on my head without having to overtighten and cause discomfort.
Joshua Magwood –
AMAZING!!! Best word to describe this hood. I’ve been a journeyman welder for 20 years, a Welding Instructor for 10 years and a CWI/CWE for 7 years. I have owned and tried every company’s premium welding hood. From Millers Infinity to Lincolns 3350 4C, Jackson BH3, ESAB Sentinel and everything in between. This Crystal 2.0 has by far the clearest optical clarity lens I have ever used. It’s almost like not wearing a hood at all. I think the passive state is the most impressive part, maybe due to my aging eyes needing more light to see before striking an arc. Plan on purchasing the halo head gear attachment to go with it. This hood is so nice I might just dedicate it for TIG work, so I don’t spatter it up.
John Nguyen –
Amazing!! It’s literally like night and day. The way I explained it to my co-worker is, it’s like the videos you seen online of the person being colorblind and them receiving the glasses that allow them to see color. That’s how I felt using this hood for the first time. Lightweight and comfortable. Looking forward to getting the Isofit headgear to take this amazing hood to the next level.
John N –
Absolutely amazing clarity!! It’s literally like night and day. I explained it to a co-worker that its like the videos you see online of a someone that I colorblind and them receiving the special glasses that allow them to see color. From fit to comfort this hood is great. Looking forward to adding the Isofit headgear to take this hood to the next level. Thank you Optrel!!
Otis Taylor –
I was skeptical at first about an auto welding helmet without a green tint lens but after my first few beads… what an amazing difference!! Totally worth it!! If I had to buy it again I would probably get the silver version because it would probably reflect the heat a little better. But in terms of quality this is the best out there in my opinion. I’ve been welding for about 20 years. And this is the best helmet I’ve ever owned!