Swiss Air PAPR Loose Fit

Features

Specifications

Type	swiss air PAPR system, battery powered
Protection Levels	TH3 (EN12941)
Flow Rates	level 1: min. 100 l/min level 2: min. 115 l/min level 3: min. 130 l/min All levels with automatic air flow control (levels are set directly on the fan and can be continuously adjusted via the control panel at the front).
Material	PA66 GF30
Fan	High-quality ball beared motor
Fuse	Electronic
Noise	max. 70db (A)
Alarm	optical (with swiss air Control Panel) and audible alarm for low / very low battery, clogged filter, no filter, and low flow Low battery: alarm period: 3.0s (1.5s on, 1.5s off) Filter: alarm period 0.5s (0.25s on, 0.25s off)
Dimensions (L x W x H)	250 x 170 x 50 mm
Weight	1200 g / 42,15 oz (incl. filter, belt and battery)
Color	Black
Material	Ripstop textile (98% polyester and 2% polyurethanes Inlay: Polyurethane foam
Valves	2 exhalation valves with silicone membrane
Color	Black
Material	Neoprene / elastic
Color	Black
Type	TH3P R SL filter for TH3P System (EU) with pre-filter
Hose	POM and silicone
Length	180 mm (elastic, up to 355 mm excl. Y-hose)
Internal diameter	21 mm
Color	Black
Type	Li-Ione, rechargeable, 3,6 V / 6,5 Ah / 23.4Wh
Operating time	level 1: 14h level 2: 12h level 3: 8h (with new filter at room temperature)
Type	Li-Ione, rechargeable, 3,6 V / 6,5 Ah / 23.4Wh
Charging time	appr. 6h
Sleep mode	after 3 hours, activation by pressing once, start at second press
Standards	EN 12941 Europe: TH3 Australia: P3 AS/NZS 1716 EAC TP TC 019/2011
Notified body	CE 1024
Scope of Delivery	Blower unit with hose, loose fit half-mask, TH3P R SL filter, spark protector, battery, harness, charger, carrying backpack, user instructions
Warranty	2 years from date of sales for manufacturing and material defects, no warranty for battery
Note	The optrel SWISS AIR respiratory system may NOT be used in environments where there is an immediate danger to health or life (IDLH), in atmospheres containing less than 17% (Europe) oxygen or where the concentration of toxins is so high that a protection class in excess of TH2 (EU) is required. It is NOT evaluated as an ignition source in flammable or explosive atmospheres.

4 reviews for Swiss Air PAPR Loose Fit

Rated 5 out of 5

Chris Murphy DMD MDS – April 26, 2021

Infection control & prevention has always been one of our office’s top priorities. With the advent of Covid-19 and other severe acute respiratory disorders in recent years, this has become even more important. The Optrel Swiss Air PAPR has provided our office an additional level of safety for myself, my team, and our patients during dental procedures.

Prior to adopting the Optrel Swiss Air PAPR my office had been wearing N95 masks for all aerosol procedures. Not only were they uncomfortable after long periods of time but I found them difficult to wear with dental loupes. Not only was the Swiss Air lightweight and compact but we’ve found the comfort to be far superior. Unlike other PAPR’s I had worn, the Swiss Air is lightweight, compact, and does not interfere with hearing. The filter is small enough to be worn under my whitecoat/PPE and does not interfere with my loupes. The flow of air through the mask is quiet, and the cool air is actually really nice. Additionally, unlike the tightly fitting N95’s I had been wearing I no longer go home with headaches at the end of the day due to my mask.

The PAPR itself is easy to use and clean. The controls located on the chest strap are intuitive and the mask is easy to fit. Patients at our practice have been very receptive and appreciate the extra steps we’ve taken to ensure their safety. I highly, highly recommend the Swiss Air PAPR!
Rated 5 out of 5

Josh Ladd – May 27, 2021

I just can’t say how much I love this system. I’m not a welder. I bought the to finish up the pandemic and for the use of my allergies. I have worn the system into stores and to work. I work in a hotel and I’ve had so many guest compliment me on this and asked me about it. I wore the optrel swiss air for 12 hours straight on a shift and only taken it off to eat or dink. It’s comfortable to wear for long periods. Best part no more headaches or mask acne I just wish this was out before the pandemic.
Rated 5 out of 5

Isaias – February 12, 2022

Love this papr , all
I can say is if you can save some extra on the side or if you can afford the product is the best investment for your health in this pandemic. Light and comfortable.
Rated 5 out of 5

John W – December 26, 2024

Best investment! Works great for Carbon arc gouging,Welding, and grinding!

Add a review

Have a question?

Please insert the code above to comment

Rick Nickols

3 years 11 months ago

Does the 4700.010 package contain a battery, and battery charger. Does it come with extra filters?
Thank you

Grant Cooper

3 years 11 months ago

Hi Rick,

The Swiss Air 4700.010 contains the blower unit, chest mounted remote, one filter, one pre-filter, spark protector, air hose, battery, battery charger Optrel back pack and the owners manual. There are no extra filters included.

tmarr

3 years 8 months ago

Are other filters available…for example to protect against organic vapors and Isocyanates?

Optrel USA

3 years 8 months ago

We currently only offer the HEPA filter for the Swiss Air.

Bob

3 years 8 months ago

Are there any plans on offering filters for vapors and gases in the future?

Don

3 years 8 months ago

Is the Swiss air water resistant such as against rain storm? If not, does it hold up in high humidity environments (e.g. higher than 65% RH)?

Optrel USA

3 years 8 months ago

You do not want to wear the Swiss Air in the rain due to the paper filters. They will lose their effectiveness in blocking contaminants. The Swiss Air has both temperature and humidity sensors in the control unit to help maintain steady air flow with temperature and humidity fluctuation. So humidity over 65% will not be a problem for the Swiss Air.

Brenner Kirkpatrick

3 years 8 months ago

Is the mask machine washable? Or do you have to wash by hand?

Optrel USA

3 years 8 months ago

You can machine wash the mask but we do recommend hang drying.

TONY

3 years 7 months ago

How long is the average life of the filter?

Optrel USA

3 years 7 months ago

We are asked this question a lot. The life of the filter depends on a couple of factors. The environment which it is being used has the largest impact on filter life. Fan speed also as a slight impact. Unfortunately without a lot more detail we cannot make an accurate claim to what kind of filter life you can expect.

tmarr

3 years 7 months ago

Will this work with a beard? In other words, is the positive pressure sufficient (or do you have a recommended setting) to ensure no air is drawn around the sides of the mask.

Optrel USA

3 years 7 months ago

The Swiss Air will work with a beard because of the positive pressure. The face mask has a foam insert that can be cut to fit by the user and an adjustable draw string under the chin to really dial in the fit. With a long or thick beard we would suggest running the blower at a bit stronger fan speed than without any facial hair.

Joey

3 years 7 months ago

Which backpack or duffle bag will this fit in along with a helmet?

Optrel USA

3 years 7 months ago

The Swiss Air comes with a backpack that will hold the Swiss Air. If you want something to hold both your hood and a Swiss Air you would need a duffel bag. Part number 6000.002.

https://optrel.us/product/duffel-bag-for-e3000x/

Pierre-Louis Boissonneau

3 years 6 months ago

How does this not need a fit-test?

Optrel USA

3 years 6 months ago

The Swiss Air works on positive pressure. The pressure inside the mask is greater than the air pressure outside the masks preventing contaminants from entering.

Pierre-Louis Boissonneau

3 years 6 months ago

Is this NIOSH approved?

Optrel USA

3 years 6 months ago

NIOSH does not currently have testing protocol for this type of product preventing NIOSH approval. The Swiss Air has obtained all major certifications from around the world but until NIOSH creates a category for this type of innovation they will not even test it.

Jason

3 years 5 months ago

One of our welders has this unit and he likes it very much, however, he got the remote cable hung up and bent the wire near the connector and it is a bit spotty now. some protection from getting snagged would be a good idea. Now I am looking for replacement parts, is there a full breakdown of parts available hidden somewhere(more likely right in front of my nose)?

Tess Leconche

3 years 2 months ago

Hi Jason – if you navigate to the Swiss Air Page: https://optrel.us/product/swiss-air-papr/ and scroll down past the Swiss Air videos, you’ll see Accessories & Replacement Parts. I hope this helps!

Dmitriy

3 years 2 months ago

Good day! Tell me to what negative temperatures can you use the mask?

Optrel USA

3 years 2 months ago

The Swiss Air has an operating temperature range of 23° F to 105° F or -5° C to 40 °C.

Jonathan Samayoa

3 years 2 months ago

Why does it have Bluetooth

Optrel USA

3 years 2 months ago

The Swiss Air has built in Bluetooth that in the future will allow the user to control the unit from their phone and update the software via Bluetooth. We do not currently have a release date for these functions.

Joe

3 years 1 month ago

Can I use my regular prescription safety glasses with it?

Optrel USA

3 years 1 month ago

You can wear any type of glasses with the Swiss Air.

Jason

3 years 7 days ago

Would this mask provide appropriate protection for working with spray paint?

Optrel USA

3 years 6 days ago

We currently only offer a HEPA filter for the Swiss Air. For spray paint you would need an O/V filter which we currently do not offer with this unit.

Kester

2 years 6 months ago

Are there any plans to make a waterproof version? It rains often where I work, outdoors in the PNW.

Optrel USA

2 years 6 months ago

We are working on a “rain coat” for the Swiss Air. Creating a waterproof version would be impossible with the need for air flow thru a filter. A rain coat would give you the protection you need for the rain you mention. This should be available in early 2023.

Chloë Moíra Smith PhD.

2 years 3 months ago

What is the positive pressure delivered during inspiration and expiration using the unit cmH₂O, where 1 cmH₂O
= 0.980665 mbar or hPa
≈ 0.000967838 atm
≈ 0.0142233433071196 psi?

Grant Cooper

2 years 3 months ago

The respirators do not deliver positive pressure. The user is breathing and has to work against the resistance of the filter. The maximal resistance is regulated by NIOSH and must be below 25 mm of H2O. This corresponds to 2.5 cmH2O. The p.air and p.air clear have a much lower resistance than demanded by NIOSH. The pressure measured depends on the air flow rate. NIOSH test at 85 liter per minute. The test protocol of NIOSH can be found here (for inhalation and exhalation)
– STP0003: https://www.cdc.gov/niosh/npptl/stps/pdfs/TEB-APR-STP-0003-508.pdf
– STP0007: https://www.cdc.gov/niosh/npptl/stps/pdfs/TEB-APR-STP-0003-508.pdf